Looking for help?
Find answers to your questions
- Can I cut Getxent tubes into smaller parts?
- Why some Odor Getxent tubes seem to have no smell for human?
- Are Getxent tubes sterile ?
- What about Getxent RASCO competitors?
- How can I handle Getxent RASCO?
- Which vacuum cleaners are compatible with Getxent RASCO?
- How can I handle non-impregnated Getxent tubes?
- How can I manipulate Getxent tubes?
- Will Getxent tubes release the exact odor of target material?
- Can I train my dog to find submerged cadavers?
- Can I use Getxent tubes for gluten detection training?
- How does Getxent technology works?
- Why does my dog trained on real material behave differently with Getxent tubes?
- Can impregnated Getxent tubes be used as baits?
- When used in public transportation, will impregnated Getxent tubes leave residues on luggages?
- How can I use a Getxent tube impregnated through RASCO?
- How can I use Getxent tubes for training?
- Can I use impregnated Getxent tubes indoors and outdoors?
- Will impregnated Getxent tubes be contaminated by the odor of the surroundings?
- Do impregnated Getxent tubes leave an olfactive print on the surface?
- How long can I use an impregnated Getxent tubes?
- Can I use control tubes ("blanks")?
- Can I impregnate 2 (or more) target odors together in one Getxent tube?
- Can I impregnate multiple Getxent tubes together?
- How do I know when a Getxent tube no longer absorbs odor of human remains?
- How can I impregnate Getxent tubes with human remains/cadaver?
- How does Getxent technology works?
- How can I impregnate Getxent tubes with odor of fire accelerants?
- Which impregnation duration is recommended to start collecting human remains or cadaver odor?
- Can I impregnated Getxent tube with frozen or cryogenized human remains ?
- How can I collect odors of fire accelerants with RASCO?
- How can I impregnate tubes with temperature sensitive target odors?
- How long is the sampling with Getxent RASCO?
- How can I collect odors with RASCO?
- How can I impregnate Getxent tubes with odor of plants?
- How can I impregnate Getxent tubes with odor of animals/insects?
- How can I impregnate Getxent tubes with live human odor?
- How can I impregnate Getxent tubes with odor of animal parts (scales, ivory, etc.)?
- How can I impregnate Getxent tubes with odor of currency?
- How can I impregnate Getxent tubes with odor of narcotics?
- How long do I need to impregnate Getxent tubes?
- How can I impregnate Getxent tubes with odor of explosives?
Split GC-MS method
INSTRUMENT CONTROL PARAMETERS: GC-MSD
----------------------------------------
Control Information
------- -----------
Sample Inlet : GC
Injection Source : Manual
Mass Spectrometer : Enabled
No Sample Prep method has been assigned to this method.
=============================================================================
6890 GC METHOD
=============================================================================
OVEN
Initial temp: 40 'C (On) Maximum temp: 260 'C
Initial time: 1.00 min Equilibration time: 3.00 min
Ramps:
# Rate Final temp Final time
1 10.00 200 5.00
2 0.0(Off)
Post temp: 0 'C
Post time: 0.00 min
Run time: 22.00 min
FRONT INLET (SPLIT/SPLITLESS) BACK INLET (UNKNOWN)
Mode: Split
Initial temp: 250 'C (On)
Pressure: 16.05 psi (On)
Split ratio: 50:1
Split flow: 49.9 mL/min
Total flow: 53.6 mL/min
Gas saver: Off
Gas type: Helium
COLUMN 1 COLUMN 2
Capillary Column (not installed)
Model Number: SPME 1227062
DB WAX
Max temperature: 260 'C
Nominal length: 60.0 m
Nominal diameter: 250.00 um
Nominal film thickness: 0.25 um
Mode: constant flow
Initial flow: 1.0 mL/min
Nominal init pressure: 16.05 psi
Average velocity: 26 cm/sec
Inlet: Front Inlet
Outlet: MSD
Outlet pressure: vacuum
FRONT DETECTOR (NO DET) BACK DETECTOR (NO DET)
SIGNAL 1 SIGNAL 2
Data rate: 20 Hz Data rate: 20 Hz
Type: test plot Type: test plot
Save Data: Off Save Data: Off
Zero: 0.0 (Off) Zero: 0.0 (Off)
Range: 0 Range: 0
Fast Peaks: Off Fast Peaks: Off
Attenuation: 0 Attenuation: 0
COLUMN COMP 1 COLUMN COMP 2
(No Detectors Installed) (No Detectors Installed)
THERMAL AUX 2
Use: MSD Transfer Line Heater
Description:
Initial temp: 220 'C (On)
Initial time: 0.00 min
# Rate Final temp Final time
1 0.0(Off)
POST RUN
Post Time: 0.00 min
TIME TABLE
Time Specifier Parameter & Setpoint
GC Injector
Front Injector:
No parameters specified
Back Injector:
No parameters specified
Column 1 Inventory Number : AB002
Column 2 Inventory Number :
MS ACQUISITION PARAMETERS
General Information
------- -----------
Tune File : atune.u
Acquistion Mode : Scan
MS Information
-- -----------
Solvent Delay : 3.00 min
EMV Mode : Gain Factor
Gain Factor : 10.00
Resulting EM Voltage : 1471
[Scan Parameters]
Low Mass : 35.0
High Mass : 500.0
Threshold : 150
Sample # : 2 A/D Samples 4
Plot 2 low mass : 50.0
Plot 2 high mass : 550.0
[MSZones]
MS Source : 230 C maximum 250 C
MS Quad : 150 C maximum 200 C
END OF MS ACQUISITION PARAMETERS
TUNE PARAMETERS for SN: US10442350
-----------------------------
Trace Ion Detection is OFF.
EMISSION : 34.610
ENERGY : 69.922
REPELLER : 28.112
IONFOCUS : 87.310
ENTRANCE_LE : 21.500
EMVOLTS : 1141.176
Actual EMV : 1470.59
GAIN FACTOR : 9.82
AMUGAIN : 2024.000
AMUOFFSET : 129.000
FILAMENT : 1.000
DCPOLARITY : 0.000
ENTLENSOFFS : 18.573
MASSGAIN : -72.000
MASSOFFSET : -9.000
END OF TUNE PARAMETERS
------------------------------------
END OF INSTRUMENT CONTROL PARAMETERS
------------------------------------
Updated on 17 May 2023
What are your Feelings?
Thanks for your feedback.
Restez informé en vous inscrivant à la newsletter de Getxent !